The XSV Board brings you the power of the XILINX Virtex FPGA embedded in a framework for processing
video and audio signals. The XSV-100 Board provides an XCV100 FPGA with 100,000 gates.
The XSV-100 can accept PAL, SECAM, or NTSC video with up to 9-bits of
resolution on the red, green, and blue channels and can output video images through a 110
MHz, 24-bit RAMDAC. The XSV-100 can also process stereo audio signals with up to 20 bits
of resolution and a bandwidth of 20 KHz. Two independent banks of 512K x 16 SRAM are
provided for local buffering of signals and data.
The XSV-100 Board has a variety of interfaces for communicating with the outside world: parallel and serial ports, Xchecker cable, USB port, PS/2 mouse and keyboard port, and 10/100 Ethernet PHY layer interface. There are also two independent expansion ports, each with 38 general purpose I/O pins connected directly to the XCV100.
You configure the XSV-100 Board through a PC parallel port, serial port, or from a bitstream stored in the 16 Mbit Flash RAM. The Flash RAM can also store data for use by the FPGA after configuration is complete.
 |
 |