|
XSV-300
Price:
$899.00
In Stock:
No
Discontinued
Features:
- XCV300 Virtex FPGA
- XC95108 CPLD
- Two 512K x 16 SRAM banks
- PAL/SECAM/NTSC video decoder
- 110 MHz RAMDAC
- 10/100 Ethernet PHY
- 16 Mbit Flash RAM
- 100 MHz programmable oscillator
- Two prototyping headers each with 38 general-purpose I/O
- Four pushbuttons
- DIP switch
- Two LED digits
- LED bargraph
- 20-bit stereo codec
- stereo in/out jacks
- VGA monitor port
- mouse/keyboard PS/2 port
- Single USB port (host or hub)
- Parallel/serial port connectors
- ATX power input or 9 VDC power jack
- XSTOOLs CD
Documentation:
Accessories:
|
The XSV Board brings you the power of the XILINX Virtex FPGA embedded in a framework for processing
video and audio signals. The XSV-300 Board provides an XCV300 FPGA with 300,000 gates.
The XSV-300 can accept PAL, SECAM, or NTSC video with up to 9-bits of
resolution on the red, green, and blue channels and can output video images through a 110
MHz, 24-bit RAMDAC. The XSV-300 can also process stereo audio signals with up to 20 bits
of resolution and a bandwidth of 20 KHz. Two independent banks of 512K x 16 SRAM are
provided for local buffering of signals and data. The XSV-300 Board has a variety of interfaces for communicating with the outside world: parallel and serial ports, Xchecker cable, USB port, PS/2 mouse and keyboard port, and 10/100 Ethernet PHY layer interface. There are also two independent expansion ports, each with 38 general purpose I/O pins connected directly to the XCV300. You configure the XSV-300 Board through a PC parallel port, serial port, or from a bitstream stored in the 16 Mbit Flash RAM. The Flash RAM can also store data for use by the FPGA after configuration is complete. |
 |
 |